Auto Carbonated Drink Filling Machine PLC Control 20000bph For CSD
1. Products: 20000bph gas beverage drinks filling machine
3. Production capacity: 10000-15000bph
4. Main material: SS304
5. Mitsubishi PLC control
6. Origin: Jiayuan
7. Certificate: CE&SGS
20000bph gas beverage drinks filling machine
1.The suspending bottle-necks cramping design makes the whole
production line more stable during the working process and it also
avoids malfunctions caused by the differences of thickness and
height of the bottle. This design also dramatically reduces the
required number of changeable parts, makes it more convenient to
change the different size bottles.
2. The advanced technology from Germany and Italy are introduced.
Isobaric filling technology is used in this machine. Filling
quickly and the amount of the liquid can be controlled accurately.
Also the beverage- holding tank is fully closed and the CIP
interface is installed.
3. Magnetic torque is used for screw capping, and the power of
screw capping can be adjusted freely. It can use constant power
screw the plastic caps and will not damage the caps.
4. Horizontal swirl wind-power cap-managing device is used to avoid
damaging the surface of cap. And when there is shortage caps in the
caps storage tank, caps will be fed automatically.
5. Human-machine interface touch-screen is adopted in this machine.
The liquid level in the tank can be controlled automatically. The
filling and capping will stop automatically when there is not
6. All parts that have direct contact with the beverages are made
of high quality stainless steel. And the main electrical components
are from famous international companies.
7. We have embraced only those technologies that are the most
practical and the most cost effective to own and operate.
8. We only offer those technologies which provide the best
versatility, flexibility and reliability for the cost.
9. The filling machines we offer are listed below some information
that will help you understand how to select the type and capacity
filler you need for your operations.
DGCF Washing, normal pressure Filling, Capping 3-in-1 unit is a new
type self-developed equipment, which bases on years’ usual practice
and adopt the advanced technology, and absorb many clients’ views.
It meets the client’s requirement about filling different bottle
size through one set. The suspension card bottleneck is adopted to
make changing the bottle size more convenient. It can deliver the
bottles automatically by blind and then washing, drying, filling,
covering, capping by order automatically. This equipment employs
frequent and speed adjustment system so that it can adjust the
speed freely and enable the operation user-friendly. This machine
is mainly used in washing, filling and sealing for gas beverage
(soda water, cola).
20000bph gas beverage drinks fillingmachine
≤+5mm Liquid Level
Fills installs the pressure (MPa)
Bottle Diameter:φ50-φ100; Height:150-310
Suitable cap Shape
Plastic Screw Cap
Total output (kw)
Bottle washing machine
Bottles are bellowed into bottle shifting wheel by air conveyor,
and when the flushing clamp reaches the position of bottle neck,
the jaw will hold the bottleneck. Under the guide of leading rail,
the bottle will be overturned to 180°into an up-right position, and
then transmitted into filling position by secondary bottle shifting
Bottle filling machine
The Filling Part is mainly composed of the filling valve, the
switch valve and filling transmission components. The finish-washed
bottle is conveyed to filling position by the bottle shifting
wheel. At the same time, the valve-opening mechanism will open the
filling valves, which with bottle on it, to fill gas in it and then
the machine begin to fill liquid. When the liquid level reaches the
ration tube, it will stop filling. After closing the valve and
finishing exhausting, the neck holding planet of the filling device
will clamp the bottle and move down into the capping shifting
Bottle capping machine
The capping part is composed of 3 sets of screw head, capping
transmission part, cap unscrambler, under cover tube and sleeving
cover part. Filled-finish bottle will be conveyed to the capping
position by the bottle shifting wheel. When the bottle passes the
sleeving cover device, the bottle mouth can hung on the cap on the
cap output part. And the cap from the sleeving cover will be
sleeved on the bottle mouth, and then be planished by the tongue
depressor. The cap screw head, which the torque has been adjusted
on it, descends when it moves on the same straight line with the
bottle, and the triplet cap ring gear will be sleeved on the bottle
cap and move down.
We Zhangjiagang Jiayuan machinery co.,ltd
Please find our products through Zhangjiagang Jiayuan Co.,Ltd in
Google, Baidu, Yahoo, Alibaba.com etc
Enquiry: Contact us by email, phone call, fax, Instant Messenger
(Trademanager, MSN, Skype) and let us
know your enquiry.
Discussion: Specify the items you desire, confirm specification.
1. What kind of products will you produce?
2. What is the capacity (per hour) you want?
3. What kind of package, plastic bottle,glass bottle : volume
,height ,neck diameter ,diameter of bottle or
other please inform us of details .
4. Sole machine or whole production line.
We Zhangjiagang Jiayuan machinery co.,ltd can offer you:
Your inquiry related to our product & price will be replied
Well-trained & experienced staff is to answer all your
inquiries in English and Chinese
Working time: 24hr/day, 7days/week (UTC+8).
Your business relationship with us will be confidential to any
Good after-sale service offered, please get back to us if you got